JOHNSON'S TIN-EZY POWDER

Industrial Strength Tinning Compound, For Use as a Slurry, or Dry

Johnson's Tin-Ezy is the fastest acting tinning compound you can use. A very dry, free flowing blend of powdered solder and special flux that cuts through dirt, grease, oil, paint and rust when heated. Tin-Ezy is most commonly used for tinning auto and industrial radiators, and other large areas economically. It works well on all common metals including aluminum, bronze, galvanized and other tough-to-tin metals. Tin-Ezy is usually mixed with water or Johnson's Soldering Fluid to be applied as a slurry, but is also quite effective when applied dry to heated metal. Its water soluble residues remain hygroscopic and corrosive until removed. Keep lid tightly closed when not in use to prevent hardening.

ITEM SINGLE CASE NO. IN CASE SHIP WT.
1 lb Jar 20-02 20-03 12 14#
4 lb Jar 20-04 20-05 6 27#
15 lb Pail 20-06 20-07 4 65#

JOHNSON'S TIN-EZY POWDER with PURE TIN

This Full Strength Tinning Without Lead

Johnson's Tin-Ezy with Pure Tin tins quickly, yet contains no lead. Like Johnson's regular Tin-Ezy, it is made in a low-humidity environment to keep it dry and free-flowing for increased storage life. This special chloride flux formulation is blended with only Grade-A Pure Tin powder. Johnson's Tin-Ezy with Pure Tin is compatible with all solders however, it is particularly useful for tinning new metal, using Johnson's 497 Lead-Free Solder. Melting temperature is 450° F. Residues are water soluble and should be removed after soldering.

ITEM SINGLE CASE NO. IN CASE SHIP WT.
1 Lb. Jar 20-62 20-63 12 14#
3 Lb. Jar 20-64 60-65 6 21#
12 Lb. Pail 20-66 20-67 4 52#

JOHNSON'S TIN-EZY BUTTER

Fast-Acting Tinning Butter, East to Apply Straight From the Jar

Johnson's Tin-Ezy Butter is a fact acting tinning compound. Its smooth butter form makes it easy to apply right out of the jar; no mixing required and its tin/lead solder particles will not fall out. Just brush on the surface to be tinned, apply heat. As soon the tinning occurs, remove the heat to prevent charring. Tin-Ezy's residues are water soluble and should be removed immediately after soldering.

ITEM SINGLE CASE NO. IN CASE SHIP WT.
1 lb Jar 23-02 23-03 12 14#
4 lb Jar 23-04 23-05 6 27#
15 lb Pail 23-16 23-07 4 65#

JOHNSON'S TIN-EZY BUTTER with PURE TIN

Pure Tin Tinning at its Easiest, Fastest, Safest!

Johnson's Tin-Ezy Butter with Pure Tin is gaining popularity among radiator shops. Our smooth tinning butter works really fast. Tin-Ezy butter makes sense when using it in new metals, followed by Johnson's Pure 497 Solder or other lead-free alloys. Like regular Tin-Ezy Butter, you should remove heat as soon as tinning occurs to avoid charring, when residues are water soluble and are easily washed off.

ITEM SINGLE CASE NO. IN CASE SHIP WT.
1 lb Jar 23-62 23-63 12 14#
4 lb Jar 23-64 23-65 6 27#
15 lb Pail 23-66 23-67 4 65#

JOHNSON'S NO. 523 BODY TINNING PASTE

Use with No. 523 LEAD-FREE, Composite Body Solder

This high tin content paste produces very strong bonds that are also highly corrosion resistant. Its temperature range is compatible with No. 523 Body Solder. This paste will not dewet steel during subsequent soldering operations. Residues must be completely washed off with water before sanding, prior to finishing.

View our Technical Bulletin on No. 523 products.

ITEM SINGLE CASE NO. IN CASE SHIP WT.
2 lb Jar 21-64 21-65 8 18#

HOME PAGE | HISTORY | NEW PRODUCTS | FLUXES | SOLDERS | CHEMICALS
TOOLS & SUPPLIES|CATALOG|HEALTHWATCH|SDS|INDUSTRIES|E-MAIL