LLOYD'S NO. 7 SILVER BRAZING FLUX
Produces Strong Silver Solder Joints
This smooth white paste is excellent for silver brazing (also called silver soldering) from 800 - 1650°F. Lloyd's No. 7 enables silver solders and phos-copper alloys to flow at their lowest possible temperatures. Works great on brass, copper, iron, steel and stainless steels. Lloyd's No. 7 is usually thinned with water to form a slurry that is easy to apply. Will not crystallize; if allowed to dry out, simply add a little more water and stir in. Residues are water soluble; hot water speeds the flux removal process.
|ITEM||SINGLE||CASE||NO. IN CASE||SHIP WT.|
|12 Oz. Squirt||07-05||07-06||12||12#|
|1/2 Lb. Jar||07-07||07-08||12||8#|
|1 Lb. Jar||07-09||07-10||12||15#|
|4 Lb. Jar||07-11||07-12||6||26#|
|55 Lb. Pail||07-13||58#|
Contains Silver, Flows like 15%
An amazingly fine Phos-Copper brazing alloy with flow and strength characteristics similar to that of 15% phos-copper. Superbraze melts fast and holds strong to make repair jobs quick, easy and economical. This is the ultimate brazing alloy for copper/brass radiator repair when used with Lloyd's No. 7 Silver Brazing Flux. Not recommended for use on iron based alloys.
|1 Lb. Superbraze, 0.050" x 1/8"||910-03|
PHOS-COPPER BRAZING ALLOYS
Contains 5% and 15 % Silver, Respectively
For low temperature brazing of brass and copper. These alloys should not be used on steel. 5% Phos-copper is an economical alloy, recommended where close fit-ups cannot be maintained. 15% Phos-Copper is recommended where ductility is of prime importance. Both alloys work best with Lloyd's No. 7 Silver Brazing Flux.
|1 Lb. 5% Silver 1/16" dia.||905-03|
|1 Lb. 15% Silver, .050x1/8"||915-03|
HOME PAGE |
NEW PRODUCTS |
TOOLS & SUPPLIES|CATALOG|HEALTHWATCH|SDS|INDUSTRIES|E-MAIL