The Original Johnson`s Product, for General Soldering Purposes
TINS SOLDERING IRONS FAST!
1/2 Lb Size.
A high metal content Paste Solder designed to pre-tin or tin in-situ for applications including Architectural Roofing and Babbitt Bearing Work
These heat resistant brushes are replenishable with more bristle material stored in the handle, just pull out more material and trim to desired length. (5/8" and 3/4" widths, 6" and 9" lengths)
Standard Cork and Rubber Combination (Brown), with cloth backing, available in 1/16" and 1/8" thicknesses.
Premium Cork and Rubber Combination (Green), no cloth backing, available in 1/16" and 1/8" thicknesses.
AGF Blow Pipes and Burner Heads Feature Improved Gas Shut-Off
Our best flux for torch work on stainless
FLUX-CORED ALUMINUM ROD
New, Low-Temp Aluminum Brazing Rod contains a Flux Core.
This tool helps in straightening out flat fins on metal heat exchangers. They are adjustable to the size and spacing of most heat exchangers.
Has Carbide Edge to Remove Old Gaskets and Gasket Tapes
Fastest, Safest Way to Test Charge Air Coolers
Contains Silver, flows like 15%
A general purpose white flux for use with low temperature alloys. It has an operating temperature of 780F to 1600F
A general purpose grey flux for higher temperature brazing of metals. It has an operating temperature of 1100F to 2200F.
This smooth white paste is designed for silver brazing at temperatures of 800F to 1650F
This petrolatum based paste has been used for years by plumbers when joining copper or brass fixtures.
This paste has been ASTM B-813 approved for use in potable water systems
A Zinc-Aluminum Flux Coated Repair Rod, designed for Aluminum Repair. Melts at 698°F to 800°F
Hand tool for PTR repair work. The claw helps you lift tabs and the jaws help you crimp tabs with a uniform force.
Original Aluminum Based Weld-Through Primer